Electrical Rewiring & Panel Cost Calculator — Connecticut
Average electrical rewiring & panel cost in Connecticut: $30,646 (typical range $26,968–$35,243, $17 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a electrical rewiring & panel cost in Connecticut?
Based on current Connecticut labor rates and material prices, a typical electrical rewiring & panel costs about $30,646. Most projects fall between $26,968 and $35,243, or roughly $17 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $18,196 |
| 1,800 sq ft | $30,646 |
| 3,600 sq ft | $55,545 |
Where the money goes
- Rewiring$14,955 (63%)
- Wall repair$4,189 (18%)
- Service & panel$3,389 (14%)
- Extras$993 (4%)
- Permit & inspection$345 (1%)
Materials $7,086 · Labor $16,205 (230 hours) · Equipment, disposal & permits $580 — before contingency, contractor overhead & profit and tax.
Connecticut vs. United States average
A typical electrical rewiring & panel in Connecticut costs 6% more than the United States average ($30,646 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $33.02 per hour in Connecticut — and from regional material prices and Sales tax (materials) of 6.35%.
Electrical Rewiring & Panel in Connecticut: local factors
Connecticut ranks 12th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Connecticut |
|---|---|---|
| Connecticut | $30,646 | — |
| Massachusetts | $32,120 | +5% |
| New York | $32,884 | +7% |
| Rhode Island | $29,563 | -4% |
Permits & contractor licensing in Connecticut
- Contractor license: Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Connecticut are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Connecticut
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $37.21 | $74.42 |
| Drywall installer | 60 | $29.33 | $58.66 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in Connecticut?
A typical electrical rewiring & panel in Connecticut costs about $30,646, with most projects between $26,968 and $35,243. That is about $17 per sq ft.
How much of the cost is labor?
Labor is about 68% of the direct cost (230 work hours) for a typical project in Connecticut. Materials are $7,086 and equipment, disposal and permits $580, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in Connecticut than in nearby states?
A typical electrical rewiring & panel costs $30,646 in Connecticut. Among nearby states, Rhode Island is the lowest at $29,563 and New York the highest at $32,884. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Connecticut?
Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →