Paver Patio Cost Calculator — Washington
Average paver patio cost in Washington: $7,145 (typical range $6,288–$8,217, $24 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Washington pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Washington?
Based on current Washington labor rates and material prices, a typical paver patio costs about $7,145. Most projects fall between $6,288 and $8,217, or roughly $24 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $4,003 |
| 300 sq ft | $7,145 |
| 600 sq ft | $13,896 |
Where the money goes
- Pavers$3,088 (56%)
- Excavation$1,270 (23%)
- Base$1,162 (21%)
Materials $2,474 · Labor $2,044 (41 hours) · Equipment, disposal & permits $1,003 — before contingency, contractor overhead & profit and tax.
Washington vs. United States average
A typical paver patio in Washington costs 13% more than the United States average ($7,145 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $38.06 per hour in Washington — and from regional material prices and Sales tax (materials) of 6.5%.
Paver Patio in Washington: local factors
Washington ranks 4th of 51 states for paver patio cost (1 = most expensive) — among the most expensive.
Permits & contractor licensing in Washington
- Contractor license: Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
- Building code: The Washington State Building Code and Washington State Energy Code — one of the strictest energy codes in the US.
- Permits: Permits are issued by the city or county; L&I issues electrical permits in many areas.
Verify a contractor: Washington Department of Labor & Industries ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Washington
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $25.23 | $50.46 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Washington?
A typical paver patio in Washington costs about $7,145, with most projects between $6,288 and $8,217. That is about $24 per sq ft.
How much of the cost is labor?
Labor is about 37% of the direct cost (41 work hours) for a typical project in Washington. Materials are $2,474 and equipment, disposal and permits $1,003, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Washington than in nearby states?
A typical paver patio costs $7,145 in Washington. Among nearby states, Idaho is the lowest at $6,081 and Oregon the highest at $6,655. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Washington?
Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →