Concrete Driveway & Slab Cost Calculator — Washington
Average concrete driveway & slab cost in Washington: $12,775 (typical range $11,242–$14,691, $16 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Washington pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Washington?
Based on current Washington labor rates and material prices, a typical concrete driveway & slab costs about $12,775. Most projects fall between $11,242 and $14,691, or roughly $16 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,909 |
| 24 × 24 ft | $9,709 |
| 40 × 20 ft | $12,775 |
| 50 × 24 ft | $18,854 |
Where the money goes
- Concrete$6,697 (68%)
- Base & forms$3,007 (30%)
- Permit$176 (2%)
Materials $4,275 · Labor $4,754 (66 hours) · Equipment, disposal & permits $851 — before contingency, contractor overhead & profit and tax.
Washington vs. United States average
A typical concrete driveway & slab in Washington costs 17% more than the United States average ($12,775 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $38.06 per hour in Washington — and from regional material prices and Sales tax (materials) of 6.5%.
Concrete Driveway & Slab in Washington: local factors
Washington ranks 3rd of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most expensive.
Permits & contractor licensing in Washington
- Contractor license: Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
- Building code: The Washington State Building Code and Washington State Energy Code — one of the strictest energy codes in the US.
- Permits: Permits are issued by the city or county; L&I issues electrical permits in many areas.
Verify a contractor: Washington Department of Labor & Industries ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Washington
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $39.37 | $78.74 |
| Construction laborer | 24 | $29.48 | $58.96 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Washington?
A typical concrete driveway & slab in Washington costs about $12,775, with most projects between $11,242 and $14,691. That is about $16 per sq ft.
How much of the cost is labor?
Labor is about 48% of the direct cost (66 work hours) for a typical project in Washington. Materials are $4,275 and equipment, disposal and permits $851, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Washington than in nearby states?
A typical concrete driveway & slab costs $12,775 in Washington. Among nearby states, Idaho is the lowest at $10,602 and Oregon the highest at $11,553. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Washington?
Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →