Paver Patio Cost Calculator — Montana

Average paver patio cost in Montana: $6,254 (typical range $5,504–$7,192, $21 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Montana pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Montana?

Based on current Montana labor rates and material prices, a typical paver patio costs about $6,254. Most projects fall between $5,504 and $7,192, or roughly $21 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,538
300 sq ft$6,254
600 sq ft$12,138

Where the money goes

  • Pavers$2,753 (56%)
  • Excavation$1,154 (23%)
  • Base$1,037 (21%)

Materials $2,381 · Labor $1,597 (41 hours) · Equipment, disposal & permits $966 — before contingency, contractor overhead & profit and tax.

Montana vs. United States average

A typical paver patio in Montana costs 1% less than the United States average ($6,254 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $28.68 per hour in Montana — and from regional material prices and Sales tax (materials) of 0%.

Paver Patio in Montana: local factors

Montana ranks 25th of 51 states for paver patio cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Montana
Montana$6,254—
Idaho$6,081-3%
North Dakota$6,2640%
South Dakota$5,929-5%
Wyoming$6,144-2%

What affects the price in Montana

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in Montana

  • Contractor license: Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Montana are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Montana

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$19.71$39.42
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Montana?

A typical paver patio in Montana costs about $6,254, with most projects between $5,504 and $7,192. That is about $21 per sq ft.

How much of the cost is labor?

Labor is about 32% of the direct cost (41 work hours) for a typical project in Montana. Materials are $2,381 and equipment, disposal and permits $966, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Montana than in nearby states?

A typical paver patio costs $6,254 in Montana. Among nearby states, South Dakota is the lowest at $5,929 and North Dakota the highest at $6,264. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Montana?

Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

What local conditions affect paver patio costs in Montana?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Montana

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming