Concrete Driveway & Slab Cost Calculator — Montana
Average concrete driveway & slab cost in Montana: $10,953 (typical range $9,639–$12,596, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Montana pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Montana?
Based on current Montana labor rates and material prices, a typical concrete driveway & slab costs about $10,953. Most projects fall between $9,639 and $12,596, or roughly $14 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,423 |
| 24 × 24 ft | $8,376 |
| 40 × 20 ft | $10,953 |
| 50 × 24 ft | $16,138 |
Where the money goes
- Concrete$5,766 (67%)
- Base & forms$2,722 (31%)
- Permit$169 (2%)
Materials $4,115 · Labor $3,724 (66 hours) · Equipment, disposal & permits $819 — before contingency, contractor overhead & profit and tax.
Montana vs. United States average
A typical concrete driveway & slab in Montana costs 1% more than the United States average ($10,953 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $28.68 per hour in Montana — and from regional material prices and Sales tax (materials) of 0%.
Concrete Driveway & Slab in Montana: local factors
Montana ranks 20th of 51 states for concrete driveway & slab cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Montana |
|---|---|---|
| Montana | $10,953 | — |
| Idaho | $10,602 | -3% |
| North Dakota | $10,803 | -1% |
| South Dakota | $9,975 | -9% |
| Wyoming | $10,740 | -2% |
What affects the price in Montana
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Montana
- Contractor license: Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Montana are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Montana
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $29.88 | $59.76 |
| Construction laborer | 24 | $24.80 | $49.60 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Montana?
A typical concrete driveway & slab in Montana costs about $10,953, with most projects between $9,639 and $12,596. That is about $14 per sq ft.
How much of the cost is labor?
Labor is about 43% of the direct cost (66 work hours) for a typical project in Montana. Materials are $4,115 and equipment, disposal and permits $819, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Montana than in nearby states?
A typical concrete driveway & slab costs $10,953 in Montana. Among nearby states, South Dakota is the lowest at $9,975 and North Dakota the highest at $10,803. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Montana?
Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect concrete driveway & slab costs in Montana?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →