Electrical Rewiring & Panel Cost Calculator — New Mexico
Average electrical rewiring & panel cost in New Mexico: $25,814 (typical range $22,716–$29,686, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Mexico pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in New Mexico?
Based on current New Mexico labor rates and material prices, a typical electrical rewiring & panel costs about $25,814. Most projects fall between $22,716 and $29,686, or roughly $14 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $15,422 |
| 1,800 sq ft | $25,814 |
| 3,600 sq ft | $46,598 |
Where the money goes
- Rewiring$12,087 (60%)
- Wall repair$3,915 (19%)
- Service & panel$2,974 (15%)
- Extras$858 (4%)
- Permit & inspection$319 (2%)
Materials $6,555 · Labor $13,062 (230 hours) · Equipment, disposal & permits $536 — before contingency, contractor overhead & profit and tax.
New Mexico vs. United States average
A typical electrical rewiring & panel in New Mexico costs 11% less than the United States average ($25,814 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $27.61 per hour in New Mexico — and from regional material prices and Sales tax (materials) of 4.875%.
Electrical Rewiring & Panel in New Mexico: local factors
New Mexico ranks 40th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. New Mexico |
|---|---|---|
| New Mexico | $25,814 | — |
| Arizona | $26,490 | +3% |
| Colorado | $27,795 | +8% |
| Oklahoma | $25,504 | -1% |
| Texas | $25,060 | -3% |
| Utah | $26,768 | +4% |
Permits & contractor licensing in New Mexico
- Contractor license: Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Mexico are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Mexico
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $28.66 | $57.32 |
| Drywall installer | 60 | $27.47 | $54.94 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in New Mexico?
A typical electrical rewiring & panel in New Mexico costs about $25,814, with most projects between $22,716 and $29,686. That is about $14 per sq ft.
How much of the cost is labor?
Labor is about 65% of the direct cost (230 work hours) for a typical project in New Mexico. Materials are $6,555 and equipment, disposal and permits $536, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in New Mexico than in nearby states?
A typical electrical rewiring & panel costs $25,814 in New Mexico. Among nearby states, Texas is the lowest at $25,060 and Colorado the highest at $27,795. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Mexico?
Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →