Concrete Driveway & Slab Cost Calculator — New Mexico

Average concrete driveway & slab cost in New Mexico: $10,128 (typical range $8,913–$11,647, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New Mexico pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in New Mexico?

Based on current New Mexico labor rates and material prices, a typical concrete driveway & slab costs about $10,128. Most projects fall between $8,913 and $11,647, or roughly $13 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".

Cost by project size

Project sizeEstimated cost
20 × 10 ft$3,193
24 × 24 ft$7,764
40 × 20 ft$10,128
50 × 24 ft$14,908

Where the money goes

  • Concrete$5,262 (67%)
  • Base & forms$2,429 (31%)
  • Permit$163 (2%)

Materials $3,955 · Labor $3,111 (66 hours) · Equipment, disposal & permits $787 — before contingency, contractor overhead & profit and tax.

New Mexico vs. United States average

A typical concrete driveway & slab in New Mexico costs 7% less than the United States average ($10,128 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $27.61 per hour in New Mexico — and from regional material prices and Sales tax (materials) of 4.875%.

Concrete Driveway & Slab in New Mexico: local factors

New Mexico ranks 41st of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. New Mexico
New Mexico$10,128—
Arizona$10,689+6%
Colorado$10,928+8%
Oklahoma$9,628-5%
Texas$9,914-2%
Utah$10,528+4%

Permits & contractor licensing in New Mexico

  • Contractor license: Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in New Mexico are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New Mexico

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42$25.41$50.82
Construction laborer24$19.93$39.86
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in New Mexico?

A typical concrete driveway & slab in New Mexico costs about $10,128, with most projects between $8,913 and $11,647. That is about $13 per sq ft.

How much of the cost is labor?

Labor is about 40% of the direct cost (66 work hours) for a typical project in New Mexico. Materials are $3,955 and equipment, disposal and permits $787, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in New Mexico than in nearby states?

A typical concrete driveway & slab costs $10,128 in New Mexico. Among nearby states, Oklahoma is the lowest at $9,628 and Colorado the highest at $10,928. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New Mexico?

Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other states

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for New Mexico

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming