Paver Patio Cost Calculator — Alaska
Average paver patio cost in Alaska: $7,887 (typical range $6,941–$9,070, $26 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a paver patio cost in Alaska?
Based on current Alaska labor rates and material prices, a typical paver patio costs about $7,887. Most projects fall between $6,941 and $9,070, or roughly $26 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $4,454 |
| 300 sq ft | $7,887 |
| 600 sq ft | $15,315 |
Where the money goes
- Pavers$3,475 (56%)
- Excavation$1,451 (23%)
- Base$1,308 (21%)
Materials $2,959 · Labor $2,075 (41 hours) · Equipment, disposal & permits $1,200 — before contingency, contractor overhead & profit and tax.
Alaska vs. United States average
A typical paver patio in Alaska costs 25% more than the United States average ($7,887 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $38.68 per hour in Alaska — and from regional material prices and Sales tax (materials) of 0%.
Paver Patio in Alaska: local factors
Alaska ranks 2nd of 51 states for paver patio cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Alaska |
|---|---|---|
| Alaska | $7,887 | — |
| Washington | $7,145 | -9% |
| Oregon | $6,655 | -16% |
What affects the price in Alaska
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Alaska
- Contractor license: Licensing rules in Alaska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Alaska are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Alaska
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $25.62 | $51.24 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Alaska?
A typical paver patio in Alaska costs about $7,887, with most projects between $6,941 and $9,070. That is about $26 per sq ft.
How much of the cost is labor?
Labor is about 33% of the direct cost (41 work hours) for a typical project in Alaska. Materials are $2,959 and equipment, disposal and permits $1,200, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Alaska than in nearby states?
A typical paver patio costs $7,887 in Alaska. Among nearby states, Oregon is the lowest at $6,655 and Washington the highest at $7,145. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Alaska?
Licensing rules in Alaska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect paver patio costs in Alaska?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →