Concrete Driveway & Slab Cost Calculator — Arizona
Average concrete driveway & slab cost in Arizona: $10,689 (typical range $9,406–$12,292, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Arizona pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Arizona?
Based on current Arizona labor rates and material prices, a typical concrete driveway & slab costs about $10,689. Most projects fall between $9,406 and $12,292, or roughly $13 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,333 |
| 24 × 24 ft | $8,169 |
| 40 × 20 ft | $10,689 |
| 50 × 24 ft | $15,749 |
Where the money goes
- Concrete$5,534 (67%)
- Base & forms$2,578 (31%)
- Permit$163 (2%)
Materials $3,955 · Labor $3,532 (66 hours) · Equipment, disposal & permits $787 — before contingency, contractor overhead & profit and tax.
Arizona vs. United States average
A typical concrete driveway & slab in Arizona costs 2% less than the United States average ($10,689 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $28.36 per hour in Arizona — and from regional material prices and Sales tax (materials) of 5.6%.
Concrete Driveway & Slab in Arizona: local factors
Arizona ranks 30th of 51 states for concrete driveway & slab cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Arizona |
|---|---|---|
| Arizona | $10,689 | — |
| California | $12,535 | +17% |
| Colorado | $10,928 | +2% |
| New Mexico | $10,128 | -5% |
| Nevada | $11,409 | +7% |
| Utah | $10,528 | -2% |
Permits & contractor licensing in Arizona
- Contractor license: Contractors must be licensed by the Arizona Registrar of Contractors (ROC); only small “handyman” jobs under a dollar limit are exempt.
- Building code: Cities and counties adopt the International Residential Code with local amendments.
- Permits: Permits are issued by the city or county; HOA approval is often needed too.
Verify a contractor: Arizona Registrar of Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Arizona
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $28.62 | $57.24 |
| Construction laborer | 24 | $23.03 | $46.06 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Arizona?
A typical concrete driveway & slab in Arizona costs about $10,689, with most projects between $9,406 and $12,292. That is about $13 per sq ft.
How much of the cost is labor?
Labor is about 43% of the direct cost (66 work hours) for a typical project in Arizona. Materials are $3,955 and equipment, disposal and permits $787, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Arizona than in nearby states?
A typical concrete driveway & slab costs $10,689 in Arizona. Among nearby states, New Mexico is the lowest at $10,128 and California the highest at $12,535. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Arizona?
Contractors must be licensed by the Arizona Registrar of Contractors (ROC); only small “handyman” jobs under a dollar limit are exempt.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →