Concrete Driveway & Slab Cost Calculator — Mississippi
Average concrete driveway & slab cost in Mississippi: $9,441 (typical range $8,308–$10,857, $12 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Mississippi pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Mississippi?
Based on current Mississippi labor rates and material prices, a typical concrete driveway & slab costs about $9,441. Most projects fall between $8,308 and $10,857, or roughly $12 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $2,995 |
| 24 × 24 ft | $7,252 |
| 40 × 20 ft | $9,441 |
| 50 × 24 ft | $13,888 |
Where the money goes
- Concrete$4,754 (66%)
- Base & forms$2,343 (32%)
- Permit$156 (2%)
Materials $3,796 · Labor $2,703 (66 hours) · Equipment, disposal & permits $755 — before contingency, contractor overhead & profit and tax.
Mississippi vs. United States average
A typical concrete driveway & slab in Mississippi costs 13% less than the United States average ($9,441 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $23.69 per hour in Mississippi — and from regional material prices and Sales tax (materials) of 7%.
Concrete Driveway & Slab in Mississippi: local factors
Mississippi ranks 50th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Mississippi |
|---|---|---|
| Mississippi | $9,441 | — |
| Alabama | $9,429 | -0% |
| Arkansas | $9,506 | +1% |
| Louisiana | $10,094 | +7% |
| Tennessee | $10,002 | +6% |
Permits & contractor licensing in Mississippi
- Contractor license: Licensing rules in Mississippi depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Mississippi are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Mississippi
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $20.90 | $41.80 |
| Construction laborer | 24 | $19.38 | $38.76 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Mississippi?
A typical concrete driveway & slab in Mississippi costs about $9,441, with most projects between $8,308 and $10,857. That is about $12 per sq ft.
How much of the cost is labor?
Labor is about 37% of the direct cost (66 work hours) for a typical project in Mississippi. Materials are $3,796 and equipment, disposal and permits $755, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Mississippi than in nearby states?
A typical concrete driveway & slab costs $9,441 in Mississippi. Among nearby states, Alabama is the lowest at $9,429 and Louisiana the highest at $10,094. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Mississippi?
Licensing rules in Mississippi depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →