Paver Patio Cost Calculator — Virginia

Average paver patio cost in Virginia: $6,052 (typical range $5,326–$6,960, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Virginia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Virginia?

Based on current Virginia labor rates and material prices, a typical paver patio costs about $6,052. Most projects fall between $5,326 and $6,960, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,428
300 sq ft$6,052
600 sq ft$11,738

Where the money goes

  • Pavers$2,606 (56%)
  • Excavation$1,100 (23%)
  • Base$981 (21%)

Materials $2,312 · Labor $1,438 (41 hours) · Equipment, disposal & permits $938 — before contingency, contractor overhead & profit and tax.

Virginia vs. United States average

A typical paver patio in Virginia costs 4% less than the United States average ($6,052 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $26.63 per hour in Virginia — and from regional material prices and Sales tax (materials) of 5.3%.

Paver Patio in Virginia: local factors

Virginia ranks 34th of 51 states for paver patio cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Virginia
Virginia$6,052—
Kentucky$5,927-2%
Maryland$6,372+5%
North Carolina$5,758-5%
Tennessee$5,884-3%
West Virginia$5,943-2%
District of Columbia$6,975+15%

Permits & contractor licensing in Virginia

  • Contractor license: Contractors need a DPOR license for work over $1,000 — Class C, B or A depending on the size of the job.
  • Building code: The Virginia Uniform Statewide Building Code applies everywhere, enforced by the locality.
  • Permits: Permits are issued by the city or county building department.

Verify a contractor: Virginia DPOR – Board for Contractors ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Virginia

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$17.75$35.50
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Virginia?

A typical paver patio in Virginia costs about $6,052, with most projects between $5,326 and $6,960. That is about $20 per sq ft.

How much of the cost is labor?

Labor is about 31% of the direct cost (41 work hours) for a typical project in Virginia. Materials are $2,312 and equipment, disposal and permits $938, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Virginia than in nearby states?

A typical paver patio costs $6,052 in Virginia. Among nearby states, North Carolina is the lowest at $5,758 and District of Columbia the highest at $6,975. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Virginia?

Contractors need a DPOR license for work over $1,000 — Class C, B or A depending on the size of the job.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Virginia

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming