Electrical Rewiring & Panel Cost Calculator — California
Average electrical rewiring & panel cost in California: $33,746 (typical range $29,696–$38,808, $19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from California pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in California?
Based on current California labor rates and material prices, a typical electrical rewiring & panel costs about $33,746. Most projects fall between $29,696 and $38,808, or roughly $19 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $19,909 |
| 1,800 sq ft | $33,746 |
| 3,600 sq ft | $61,419 |
Where the money goes
- Rewiring$16,292 (62%)
- Wall repair$4,991 (19%)
- Service & panel$3,569 (14%)
- Extras$1,052 (4%)
- Permit & inspection$355 (1%)
Materials $7,284 · Labor $18,379 (230 hours) · Equipment, disposal & permits $596 — before contingency, contractor overhead & profit and tax.
California vs. United States average
A typical electrical rewiring & panel in California costs 17% more than the United States average ($33,746 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $37.89 per hour in California — and from regional material prices and Sales tax (materials) of 7.25%.
Electrical Rewiring & Panel in California: local factors
California ranks 8th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. California |
|---|---|---|
| California | $33,746 | — |
| Arizona | $26,490 | -22% |
| Nevada | $29,837 | -12% |
| Oregon | $35,640 | +6% |
Permits & contractor licensing in California
- Contractor license: Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.
- Building code: Work must meet the California Residential Code and the Title 24 energy standards (2025 edition in effect since January 1, 2026), including seismic and, in fire-hazard zones, wildland–urban interface rules.
- Permits: Permits come from the city or county building department; remodels that add electrical circuits, move plumbing or change structure need one. Energy-code (Title 24) compliance forms are often required.
Verify a contractor: Contractors State License Board (CSLB) ↗. Rules change — always confirm with your local building department.
Labor rates for this project in California
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $41.28 | $82.56 |
| Drywall installer | 60 | $35.91 | $71.82 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in California?
A typical electrical rewiring & panel in California costs about $33,746, with most projects between $29,696 and $38,808. That is about $19 per sq ft.
How much of the cost is labor?
Labor is about 70% of the direct cost (230 work hours) for a typical project in California. Materials are $7,284 and equipment, disposal and permits $596, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in California than in nearby states?
A typical electrical rewiring & panel costs $33,746 in California. Among nearby states, Arizona is the lowest at $26,490 and Oregon the highest at $35,640. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in California?
Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →