Electrical Rewiring & Panel Cost Calculator — North Carolina
Average electrical rewiring & panel cost in North Carolina: $24,169 (typical range $21,269–$27,794, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Carolina pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in North Carolina?
Based on current North Carolina labor rates and material prices, a typical electrical rewiring & panel costs about $24,169. Most projects fall between $21,269 and $27,794, or roughly $13 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $14,528 |
| 1,800 sq ft | $24,169 |
| 3,600 sq ft | $43,452 |
Where the money goes
- Rewiring$11,615 (62%)
- Wall repair$3,211 (17%)
- Service & panel$2,893 (15%)
- Extras$833 (4%)
- Permit & inspection$313 (2%)
Materials $6,423 · Labor $11,916 (230 hours) · Equipment, disposal & permits $526 — before contingency, contractor overhead & profit and tax.
North Carolina vs. United States average
A typical electrical rewiring & panel in North Carolina costs 16% less than the United States average ($24,169 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $24.28 per hour in North Carolina — and from regional material prices and Sales tax (materials) of 4.75%.
Electrical Rewiring & Panel in North Carolina: local factors
North Carolina ranks 49th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. North Carolina |
|---|---|---|
| North Carolina | $24,169 | — |
| Georgia | $25,887 | +7% |
| South Carolina | $24,947 | +3% |
| Tennessee | $26,043 | +8% |
| Virginia | $27,516 | +14% |
Permits & contractor licensing in North Carolina
- Contractor license: Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
- Building code: The North Carolina Residential Code applies statewide, enforced by county and city inspection departments.
- Permits: Permits are issued by the county or city inspections department; homeowners may pull permits for work on their own home.
Verify a contractor: NC Licensing Board for General Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in North Carolina
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $27.33 | $54.66 |
| Drywall installer | 60 | $21.66 | $43.32 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in North Carolina?
A typical electrical rewiring & panel in North Carolina costs about $24,169, with most projects between $21,269 and $27,794. That is about $13 per sq ft.
How much of the cost is labor?
Labor is about 63% of the direct cost (230 work hours) for a typical project in North Carolina. Materials are $6,423 and equipment, disposal and permits $526, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in North Carolina than in nearby states?
A typical electrical rewiring & panel costs $24,169 in North Carolina. Among nearby states, South Carolina is the lowest at $24,947 and Virginia the highest at $27,516. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Carolina?
Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →