Concrete Driveway & Slab Cost Calculator — North Carolina
Average concrete driveway & slab cost in North Carolina: $9,818 (typical range $8,640–$11,291, $12 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Carolina pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in North Carolina?
Based on current North Carolina labor rates and material prices, a typical concrete driveway & slab costs about $9,818. Most projects fall between $8,640 and $11,291, or roughly $12 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,102 |
| 24 × 24 ft | $7,532 |
| 40 × 20 ft | $9,818 |
| 50 × 24 ft | $14,449 |
Where the money goes
- Concrete$4,969 (65%)
- Base & forms$2,487 (33%)
- Permit$160 (2%)
Materials $3,875 · Labor $2,969 (66 hours) · Equipment, disposal & permits $771 — before contingency, contractor overhead & profit and tax.
North Carolina vs. United States average
A typical concrete driveway & slab in North Carolina costs 10% less than the United States average ($9,818 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $24.28 per hour in North Carolina — and from regional material prices and Sales tax (materials) of 4.75%.
Concrete Driveway & Slab in North Carolina: local factors
North Carolina ranks 46th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. North Carolina |
|---|---|---|
| North Carolina | $9,818 | — |
| Georgia | $9,784 | -0% |
| South Carolina | $10,230 | +4% |
| Tennessee | $10,002 | +2% |
| Virginia | $10,275 | +5% |
Permits & contractor licensing in North Carolina
- Contractor license: Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
- Building code: The North Carolina Residential Code applies statewide, enforced by county and city inspection departments.
- Permits: Permits are issued by the county or city inspections department; homeowners may pull permits for work on their own home.
Verify a contractor: NC Licensing Board for General Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in North Carolina
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $22.70 | $45.40 |
| Construction laborer | 24 | $21.76 | $43.52 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in North Carolina?
A typical concrete driveway & slab in North Carolina costs about $9,818, with most projects between $8,640 and $11,291. That is about $12 per sq ft.
How much of the cost is labor?
Labor is about 39% of the direct cost (66 work hours) for a typical project in North Carolina. Materials are $3,875 and equipment, disposal and permits $771, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in North Carolina than in nearby states?
A typical concrete driveway & slab costs $9,818 in North Carolina. Among nearby states, Georgia is the lowest at $9,784 and Virginia the highest at $10,275. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Carolina?
Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →