Electrical Rewiring & Panel Cost Calculator — Nevada

Average electrical rewiring & panel cost in Nevada: $29,837 (typical range $26,257–$34,313, $17 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a electrical rewiring & panel cost in Nevada?

Based on current Nevada labor rates and material prices, a typical electrical rewiring & panel costs about $29,837. Most projects fall between $26,257 and $34,313, or roughly $17 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
900 sq ft$17,704
1,800 sq ft$29,837
3,600 sq ft$54,104

Where the money goes

  • Rewiring$14,572 (63%)
  • Wall repair$4,073 (18%)
  • Service & panel$3,279 (14%)
  • Extras$961 (4%)
  • Permit & inspection$332 (1%)

Materials $6,821 · Labor $15,839 (230 hours) · Equipment, disposal & permits $558 — before contingency, contractor overhead & profit and tax.

Nevada vs. United States average

A typical electrical rewiring & panel in Nevada costs 3% more than the United States average ($29,837 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $33.29 per hour in Nevada — and from regional material prices and Sales tax (materials) of 6.85%.

Electrical Rewiring & Panel in Nevada: local factors

Nevada ranks 15th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Nevada
Nevada$29,837—
Arizona$26,490-11%
California$33,746+13%
Idaho$26,791-10%
Oregon$35,640+19%
Utah$26,768-10%

Permits & contractor licensing in Nevada

  • Contractor license: Licensing rules in Nevada depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Nevada are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Nevada

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171$36.40$72.80
Drywall installer60$28.58$57.16
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Nevada?

A typical electrical rewiring & panel in Nevada costs about $29,837, with most projects between $26,257 and $34,313. That is about $17 per sq ft.

How much of the cost is labor?

Labor is about 68% of the direct cost (230 work hours) for a typical project in Nevada. Materials are $6,821 and equipment, disposal and permits $558, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Nevada than in nearby states?

A typical electrical rewiring & panel costs $29,837 in Nevada. Among nearby states, Arizona is the lowest at $26,490 and Oregon the highest at $35,640. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Nevada?

Licensing rules in Nevada depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Nevada

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming