Electrical Rewiring & Panel Cost Calculator — Georgia

Average electrical rewiring & panel cost in Georgia: $25,887 (typical range $22,781–$29,770, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a electrical rewiring & panel cost in Georgia?

Based on current Georgia labor rates and material prices, a typical electrical rewiring & panel costs about $25,887. Most projects fall between $22,781 and $29,770, or roughly $14 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
900 sq ft$15,426
1,800 sq ft$25,887
3,600 sq ft$46,809

Where the money goes

  • Rewiring$12,234 (60%)
  • Wall repair$3,909 (19%)
  • Service & panel$2,950 (15%)
  • Extras$854 (4%)
  • Permit & inspection$313 (2%)

Materials $6,423 · Labor $13,312 (230 hours) · Equipment, disposal & permits $526 — before contingency, contractor overhead & profit and tax.

Georgia vs. United States average

A typical electrical rewiring & panel in Georgia costs 10% less than the United States average ($25,887 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $24.18 per hour in Georgia — and from regional material prices and Sales tax (materials) of 4%.

Electrical Rewiring & Panel in Georgia: local factors

Georgia ranks 39th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Georgia
Georgia$25,887—
Alabama$24,372-6%
Florida$24,886-4%
North Carolina$24,169-7%
South Carolina$24,947-4%
Tennessee$26,043+1%

Permits & contractor licensing in Georgia

  • Contractor license: Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.
  • Building code: Georgia adopts the International Residential Code with state amendments, enforced by cities and counties.
  • Permits: Permits are issued by the city or county building department.

Verify a contractor: Georgia Secretary of State – Professional Licensing ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Georgia

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171$29.37$58.74
Drywall installer60$27.53$55.06
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Georgia?

A typical electrical rewiring & panel in Georgia costs about $25,887, with most projects between $22,781 and $29,770. That is about $14 per sq ft.

How much of the cost is labor?

Labor is about 66% of the direct cost (230 work hours) for a typical project in Georgia. Materials are $6,423 and equipment, disposal and permits $526, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Georgia than in nearby states?

A typical electrical rewiring & panel costs $25,887 in Georgia. Among nearby states, North Carolina is the lowest at $24,169 and Tennessee the highest at $26,043. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Georgia?

Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Georgia

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming