Electrical Rewiring & Panel Cost Calculator — Illinois

Average electrical rewiring & panel cost in Illinois: $34,282 (typical range $30,168–$39,424, $19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a electrical rewiring & panel cost in Illinois?

Based on current Illinois labor rates and material prices, a typical electrical rewiring & panel costs about $34,282. Most projects fall between $30,168 and $39,424, or roughly $19 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
900 sq ft$20,114
1,800 sq ft$34,282
3,600 sq ft$62,619

Where the money goes

  • Rewiring$17,015 (64%)
  • Wall repair$4,838 (18%)
  • Service & panel$3,523 (13%)
  • Extras$1,050 (4%)
  • Permit & inspection$335 (1%)

Materials $6,887 · Labor $19,310 (230 hours) · Equipment, disposal & permits $564 — before contingency, contractor overhead & profit and tax.

Illinois vs. United States average

A typical electrical rewiring & panel in Illinois costs 19% more than the United States average ($34,282 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $38.62 per hour in Illinois — and from regional material prices and Sales tax (materials) of 6.25%.

Electrical Rewiring & Panel in Illinois: local factors

Illinois ranks 5th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Illinois
Illinois$34,282—
Indiana$27,990-18%
Iowa$26,254-23%
Kentucky$25,418-26%
Missouri$29,048-15%
Wisconsin$29,078-15%

Permits & contractor licensing in Illinois

  • Contractor license: Illinois has no statewide general contractor license, but roofing contractors must be licensed by the IDFPR and plumbers by the Department of Public Health. Chicago licenses general contractors.
  • Building code: Building codes are adopted locally; Chicago has its own Chicago Building Code.
  • Permits: Permits come from the city, village or county. Chicago offers express permits for many small residential jobs.

Verify a contractor: Illinois Department of Financial and Professional Regulation (IDFPR) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Illinois

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171$44.34$88.68
Drywall installer60$34.95$69.90
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Illinois?

A typical electrical rewiring & panel in Illinois costs about $34,282, with most projects between $30,168 and $39,424. That is about $19 per sq ft.

How much of the cost is labor?

Labor is about 72% of the direct cost (230 work hours) for a typical project in Illinois. Materials are $6,887 and equipment, disposal and permits $564, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Illinois than in nearby states?

A typical electrical rewiring & panel costs $34,282 in Illinois. Among nearby states, Kentucky is the lowest at $25,418 and Wisconsin the highest at $29,078. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Illinois?

Illinois has no statewide general contractor license, but roofing contractors must be licensed by the IDFPR and plumbers by the Department of Public Health. Chicago licenses general contractors.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Illinois

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming