Concrete Driveway & Slab Cost Calculator — Georgia

Average concrete driveway & slab cost in Georgia: $9,784 (typical range $8,610–$11,252, $12 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Georgia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Georgia?

Based on current Georgia labor rates and material prices, a typical concrete driveway & slab costs about $9,784. Most projects fall between $8,610 and $11,252, or roughly $12 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".

Cost by project size

Project sizeEstimated cost
20 × 10 ft$3,093
24 × 24 ft$7,507
40 × 20 ft$9,784
50 × 24 ft$14,399

Where the money goes

  • Concrete$5,051 (66%)
  • Base & forms$2,401 (32%)
  • Permit$160 (2%)

Materials $3,875 · Labor $2,965 (66 hours) · Equipment, disposal & permits $771 — before contingency, contractor overhead & profit and tax.

Georgia vs. United States average

A typical concrete driveway & slab in Georgia costs 10% less than the United States average ($9,784 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $24.18 per hour in Georgia — and from regional material prices and Sales tax (materials) of 4%.

Concrete Driveway & Slab in Georgia: local factors

Georgia ranks 47th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Georgia
Georgia$9,784—
Alabama$9,429-4%
Florida$10,247+5%
North Carolina$9,8180%
South Carolina$10,230+5%
Tennessee$10,002+2%

Permits & contractor licensing in Georgia

  • Contractor license: Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.
  • Building code: Georgia adopts the International Residential Code with state amendments, enforced by cities and counties.
  • Permits: Permits are issued by the city or county building department.

Verify a contractor: Georgia Secretary of State – Professional Licensing ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Georgia

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42$23.67$47.34
Construction laborer24$19.96$39.92
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Georgia?

A typical concrete driveway & slab in Georgia costs about $9,784, with most projects between $8,610 and $11,252. That is about $12 per sq ft.

How much of the cost is labor?

Labor is about 39% of the direct cost (66 work hours) for a typical project in Georgia. Materials are $3,875 and equipment, disposal and permits $771, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Georgia than in nearby states?

A typical concrete driveway & slab costs $9,784 in Georgia. Among nearby states, Alabama is the lowest at $9,429 and Florida the highest at $10,247. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Georgia?

Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other states

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Georgia

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming