Paver Patio Cost Calculator — Georgia

Average paver patio cost in Georgia: $5,818 (typical range $5,120–$6,691, $19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Georgia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Georgia?

Based on current Georgia labor rates and material prices, a typical paver patio costs about $5,818. Most projects fall between $5,120 and $6,691, or roughly $19 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,298
300 sq ft$5,818
600 sq ft$11,283

Where the money goes

  • Pavers$2,517 (56%)
  • Excavation$1,063 (23%)
  • Base$948 (21%)

Materials $2,243 · Labor $1,376 (41 hours) · Equipment, disposal & permits $910 — before contingency, contractor overhead & profit and tax.

Georgia vs. United States average

A typical paver patio in Georgia costs 8% less than the United States average ($5,818 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $24.18 per hour in Georgia — and from regional material prices and Sales tax (materials) of 4%.

Paver Patio in Georgia: local factors

Georgia ranks 46th of 51 states for paver patio cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Georgia
Georgia$5,818—
Alabama$5,632-3%
Florida$5,959+2%
North Carolina$5,758-1%
South Carolina$5,856+1%
Tennessee$5,884+1%

Permits & contractor licensing in Georgia

  • Contractor license: Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.
  • Building code: Georgia adopts the International Residential Code with state amendments, enforced by cities and counties.
  • Permits: Permits are issued by the city or county building department.

Verify a contractor: Georgia Secretary of State – Professional Licensing ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Georgia

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$16.99$33.98
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Georgia?

A typical paver patio in Georgia costs about $5,818, with most projects between $5,120 and $6,691. That is about $19 per sq ft.

How much of the cost is labor?

Labor is about 30% of the direct cost (41 work hours) for a typical project in Georgia. Materials are $2,243 and equipment, disposal and permits $910, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Georgia than in nearby states?

A typical paver patio costs $5,818 in Georgia. Among nearby states, Alabama is the lowest at $5,632 and Florida the highest at $5,959. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Georgia?

Jobs over $2,500 require a residential or general contractor license from the State Licensing Board for Residential and General Contractors.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Georgia

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming