Paver Patio Cost Calculator — Illinois

Average paver patio cost in Illinois: $7,024 (typical range $6,181–$8,078, $23 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Illinois pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Illinois?

Based on current Illinois labor rates and material prices, a typical paver patio costs about $7,024. Most projects fall between $6,181 and $8,078, or roughly $23 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,930
300 sq ft$7,024
600 sq ft$13,666

Where the money goes

  • Pavers$3,042 (56%)
  • Excavation$1,247 (23%)
  • Base$1,145 (21%)

Materials $2,404 · Labor $2,054 (41 hours) · Equipment, disposal & permits $975 — before contingency, contractor overhead & profit and tax.

Illinois vs. United States average

A typical paver patio in Illinois costs 11% more than the United States average ($7,024 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $38.62 per hour in Illinois — and from regional material prices and Sales tax (materials) of 6.25%.

Paver Patio in Illinois: local factors

Illinois ranks 8th of 51 states for paver patio cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Illinois
Illinois$7,024—
Indiana$6,206-12%
Iowa$6,105-13%
Kentucky$5,927-16%
Missouri$6,273-11%
Wisconsin$6,436-8%

Permits & contractor licensing in Illinois

  • Contractor license: Illinois has no statewide general contractor license, but roofing contractors must be licensed by the IDFPR and plumbers by the Department of Public Health. Chicago licenses general contractors.
  • Building code: Building codes are adopted locally; Chicago has its own Chicago Building Code.
  • Permits: Permits come from the city, village or county. Chicago offers express permits for many small residential jobs.

Verify a contractor: Illinois Department of Financial and Professional Regulation (IDFPR) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Illinois

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$25.36$50.72
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Illinois?

A typical paver patio in Illinois costs about $7,024, with most projects between $6,181 and $8,078. That is about $23 per sq ft.

How much of the cost is labor?

Labor is about 38% of the direct cost (41 work hours) for a typical project in Illinois. Materials are $2,404 and equipment, disposal and permits $975, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Illinois than in nearby states?

A typical paver patio costs $7,024 in Illinois. Among nearby states, Kentucky is the lowest at $5,927 and Wisconsin the highest at $6,436. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Illinois?

Illinois has no statewide general contractor license, but roofing contractors must be licensed by the IDFPR and plumbers by the Department of Public Health. Chicago licenses general contractors.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Illinois

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming