Concrete Driveway & Slab Cost Calculator — Delaware

Average concrete driveway & slab cost in Delaware: $10,713 (typical range $9,427–$12,320, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Delaware pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Delaware?

Based on current Delaware labor rates and material prices, a typical concrete driveway & slab costs about $10,713. Most projects fall between $9,427 and $12,320, or roughly $13 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".

Cost by project size

Project sizeEstimated cost
20 × 10 ft$3,357
24 × 24 ft$8,199
40 × 20 ft$10,713
50 × 24 ft$15,781

Where the money goes

  • Concrete$5,676 (67%)
  • Base & forms$2,626 (31%)
  • Permit$168 (2%)

Materials $4,075 · Labor $3,583 (66 hours) · Equipment, disposal & permits $811 — before contingency, contractor overhead & profit and tax.

Delaware vs. United States average

A typical concrete driveway & slab in Delaware costs 2% less than the United States average ($10,713 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $30.14 per hour in Delaware — and from regional material prices and Sales tax (materials) of 0%.

Concrete Driveway & Slab in Delaware: local factors

Delaware ranks 28th of 51 states for concrete driveway & slab cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Delaware
Delaware$10,713—
Maryland$10,703-0%
New Jersey$12,362+15%
Pennsylvania$11,210+5%

Permits & contractor licensing in Delaware

  • Contractor license: Licensing rules in Delaware depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Delaware are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Delaware

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42$29.18$58.36
Construction laborer24$23.09$46.18
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Delaware?

A typical concrete driveway & slab in Delaware costs about $10,713, with most projects between $9,427 and $12,320. That is about $13 per sq ft.

How much of the cost is labor?

Labor is about 42% of the direct cost (66 work hours) for a typical project in Delaware. Materials are $4,075 and equipment, disposal and permits $811, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Delaware than in nearby states?

A typical concrete driveway & slab costs $10,713 in Delaware. Among nearby states, Maryland is the lowest at $10,703 and New Jersey the highest at $12,362. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Delaware?

Licensing rules in Delaware depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other states

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Delaware

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming