Concrete Driveway & Slab Cost Calculator — Indiana
Average concrete driveway & slab cost in Indiana: $10,904 (typical range $9,596–$12,540, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Indiana pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Indiana?
Based on current Indiana labor rates and material prices, a typical concrete driveway & slab costs about $10,904. Most projects fall between $9,596 and $12,540, or roughly $14 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,381 |
| 24 × 24 ft | $8,319 |
| 40 × 20 ft | $10,904 |
| 50 × 24 ft | $16,073 |
Where the money goes
- Concrete$5,537 (66%)
- Base & forms$2,705 (32%)
- Permit$161 (2%)
Materials $3,915 · Labor $3,708 (66 hours) · Equipment, disposal & permits $779 — before contingency, contractor overhead & profit and tax.
Indiana vs. United States average
A typical concrete driveway & slab in Indiana costs 0% less than the United States average ($10,904 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $31.22 per hour in Indiana — and from regional material prices and Sales tax (materials) of 7%.
Concrete Driveway & Slab in Indiana: local factors
Indiana ranks 22nd of 51 states for concrete driveway & slab cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Indiana |
|---|---|---|
| Indiana | $10,904 | — |
| Illinois | $12,548 | +15% |
| Kentucky | $10,154 | -7% |
| Michigan | $10,876 | -0% |
| Ohio | $11,218 | +3% |
Permits & contractor licensing in Indiana
- Contractor license: Licensing rules in Indiana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Indiana are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Indiana
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $29.02 | $58.04 |
| Construction laborer | 24 | $25.99 | $51.98 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Indiana?
A typical concrete driveway & slab in Indiana costs about $10,904, with most projects between $9,596 and $12,540. That is about $14 per sq ft.
How much of the cost is labor?
Labor is about 44% of the direct cost (66 work hours) for a typical project in Indiana. Materials are $3,915 and equipment, disposal and permits $779, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Indiana than in nearby states?
A typical concrete driveway & slab costs $10,904 in Indiana. Among nearby states, Kentucky is the lowest at $10,154 and Illinois the highest at $12,548. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Indiana?
Licensing rules in Indiana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →