Concrete Driveway & Slab Cost Calculator — Nebraska
Average concrete driveway & slab cost in Nebraska: $10,266 (typical range $9,034–$11,806, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Nebraska pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Nebraska?
Based on current Nebraska labor rates and material prices, a typical concrete driveway & slab costs about $10,266. Most projects fall between $9,034 and $11,806, or roughly $13 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,221 |
| 24 × 24 ft | $7,859 |
| 40 × 20 ft | $10,266 |
| 50 × 24 ft | $15,117 |
Where the money goes
- Concrete$5,210 (66%)
- Base & forms$2,574 (32%)
- Permit$161 (2%)
Materials $3,915 · Labor $3,250 (66 hours) · Equipment, disposal & permits $779 — before contingency, contractor overhead & profit and tax.
Nebraska vs. United States average
A typical concrete driveway & slab in Nebraska costs 6% less than the United States average ($10,266 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $26.43 per hour in Nebraska — and from regional material prices and Sales tax (materials) of 5.5%.
Concrete Driveway & Slab in Nebraska: local factors
Nebraska ranks 36th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Nebraska |
|---|---|---|
| Nebraska | $10,266 | — |
| Colorado | $10,928 | +6% |
| Iowa | $10,662 | +4% |
| Kansas | $10,391 | +1% |
| Missouri | $11,189 | +9% |
| South Dakota | $9,975 | -3% |
| Wyoming | $10,740 | +5% |
What affects the price in Nebraska
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Nebraska
- Contractor license: Licensing rules in Nebraska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Nebraska are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Nebraska
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $25.17 | $50.34 |
| Construction laborer | 24 | $23.25 | $46.50 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Nebraska?
A typical concrete driveway & slab in Nebraska costs about $10,266, with most projects between $9,034 and $11,806. That is about $13 per sq ft.
How much of the cost is labor?
Labor is about 41% of the direct cost (66 work hours) for a typical project in Nebraska. Materials are $3,915 and equipment, disposal and permits $779, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Nebraska than in nearby states?
A typical concrete driveway & slab costs $10,266 in Nebraska. Among nearby states, South Dakota is the lowest at $9,975 and Missouri the highest at $11,189. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Nebraska?
Licensing rules in Nebraska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect concrete driveway & slab costs in Nebraska?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →