Concrete Driveway & Slab Cost Calculator — Kansas
Average concrete driveway & slab cost in Kansas: $10,391 (typical range $9,144–$11,950, $13 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Kansas pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Kansas?
Based on current Kansas labor rates and material prices, a typical concrete driveway & slab costs about $10,391. Most projects fall between $9,144 and $11,950, or roughly $13 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,246 |
| 24 × 24 ft | $7,945 |
| 40 × 20 ft | $10,391 |
| 50 × 24 ft | $15,307 |
Where the money goes
- Concrete$5,361 (67%)
- Base & forms$2,495 (31%)
- Permit$160 (2%)
Materials $3,875 · Labor $3,368 (66 hours) · Equipment, disposal & permits $771 — before contingency, contractor overhead & profit and tax.
Kansas vs. United States average
A typical concrete driveway & slab in Kansas costs 4% less than the United States average ($10,391 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $28.59 per hour in Kansas — and from regional material prices and Sales tax (materials) of 6.5%.
Concrete Driveway & Slab in Kansas: local factors
Kansas ranks 34th of 51 states for concrete driveway & slab cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Kansas |
|---|---|---|
| Kansas | $10,391 | — |
| Colorado | $10,928 | +5% |
| Missouri | $11,189 | +8% |
| Nebraska | $10,266 | -1% |
| Oklahoma | $9,628 | -7% |
Permits & contractor licensing in Kansas
- Contractor license: Licensing rules in Kansas depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Kansas are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Kansas
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $27.32 | $54.64 |
| Construction laborer | 24 | $21.91 | $43.82 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Kansas?
A typical concrete driveway & slab in Kansas costs about $10,391, with most projects between $9,144 and $11,950. That is about $13 per sq ft.
How much of the cost is labor?
Labor is about 42% of the direct cost (66 work hours) for a typical project in Kansas. Materials are $3,875 and equipment, disposal and permits $771, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Kansas than in nearby states?
A typical concrete driveway & slab costs $10,391 in Kansas. Among nearby states, Oklahoma is the lowest at $9,628 and Missouri the highest at $11,189. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Kansas?
Licensing rules in Kansas depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →