Concrete Driveway & Slab Cost Calculator — Wisconsin
Average concrete driveway & slab cost in Wisconsin: $11,501 (typical range $10,121–$13,226, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Wisconsin pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Wisconsin?
Based on current Wisconsin labor rates and material prices, a typical concrete driveway & slab costs about $11,501. Most projects fall between $10,121 and $13,226, or roughly $14 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,543 |
| 24 × 24 ft | $8,758 |
| 40 × 20 ft | $11,501 |
| 50 × 24 ft | $16,965 |
Where the money goes
- Concrete$5,944 (67%)
- Base & forms$2,825 (32%)
- Permit$165 (2%)
Materials $3,995 · Labor $4,144 (66 hours) · Equipment, disposal & permits $795 — before contingency, contractor overhead & profit and tax.
Wisconsin vs. United States average
A typical concrete driveway & slab in Wisconsin costs 6% more than the United States average ($11,501 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $31.39 per hour in Wisconsin — and from regional material prices and Sales tax (materials) of 5%.
Concrete Driveway & Slab in Wisconsin: local factors
Wisconsin ranks 14th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Wisconsin |
|---|---|---|
| Wisconsin | $11,501 | — |
| Illinois | $12,548 | +9% |
| Iowa | $10,662 | -7% |
| Michigan | $10,876 | -5% |
| Minnesota | $12,061 | +5% |
What affects the price in Wisconsin
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Wisconsin
- Contractor license: Licensing rules in Wisconsin depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Wisconsin are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Wisconsin
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $33.09 | $66.18 |
| Construction laborer | 24 | $27.87 | $55.74 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Wisconsin?
A typical concrete driveway & slab in Wisconsin costs about $11,501, with most projects between $10,121 and $13,226. That is about $14 per sq ft.
How much of the cost is labor?
Labor is about 46% of the direct cost (66 work hours) for a typical project in Wisconsin. Materials are $3,995 and equipment, disposal and permits $795, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Wisconsin than in nearby states?
A typical concrete driveway & slab costs $11,501 in Wisconsin. Among nearby states, Iowa is the lowest at $10,662 and Illinois the highest at $12,548. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Wisconsin?
Licensing rules in Wisconsin depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect concrete driveway & slab costs in Wisconsin?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →