Concrete Driveway & Slab Cost Calculator — Ohio
Average concrete driveway & slab cost in Ohio: $11,218 (typical range $9,872–$12,901, $14 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Ohio pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Ohio?
Based on current Ohio labor rates and material prices, a typical concrete driveway & slab costs about $11,218. Most projects fall between $9,872 and $12,901, or roughly $14 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,466 |
| 24 × 24 ft | $8,550 |
| 40 × 20 ft | $11,218 |
| 50 × 24 ft | $16,543 |
Where the money goes
- Concrete$5,708 (66%)
- Base & forms$2,818 (32%)
- Permit$163 (2%)
Materials $3,955 · Labor $3,946 (66 hours) · Equipment, disposal & permits $787 — before contingency, contractor overhead & profit and tax.
Ohio vs. United States average
A typical concrete driveway & slab in Ohio costs 3% more than the United States average ($11,218 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $30.09 per hour in Ohio — and from regional material prices and Sales tax (materials) of 5.75%.
Concrete Driveway & Slab in Ohio: local factors
Ohio ranks 17th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Ohio |
|---|---|---|
| Ohio | $11,218 | — |
| Indiana | $10,904 | -3% |
| Kentucky | $10,154 | -9% |
| Michigan | $10,876 | -3% |
| Pennsylvania | $11,210 | -0% |
| West Virginia | $10,176 | -9% |
What affects the price in Ohio
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Ohio
- Contractor license: Residential general contractors are licensed or registered locally (city or county). Commercial HVAC, electrical, plumbing and hydronics contractors are licensed by the Ohio Construction Industry Licensing Board.
- Building code: The Residential Code of Ohio (based on the IRC) applies to one-, two- and three-family homes.
- Permits: Permits come from the certified city or county building department; some rural areas have no residential inspections.
Licensing authority: Ohio Department of Commerce – Industrial Compliance. Rules change — always confirm with your local building department.
Labor rates for this project in Ohio
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $30.67 | $61.34 |
| Construction laborer | 24 | $28.03 | $56.06 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Ohio?
A typical concrete driveway & slab in Ohio costs about $11,218, with most projects between $9,872 and $12,901. That is about $14 per sq ft.
How much of the cost is labor?
Labor is about 45% of the direct cost (66 work hours) for a typical project in Ohio. Materials are $3,955 and equipment, disposal and permits $787, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Ohio than in nearby states?
A typical concrete driveway & slab costs $11,218 in Ohio. Among nearby states, Kentucky is the lowest at $10,154 and Pennsylvania the highest at $11,210. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Ohio?
Residential general contractors are licensed or registered locally (city or county). Commercial HVAC, electrical, plumbing and hydronics contractors are licensed by the Ohio Construction Industry Licensing Board.
What local conditions affect concrete driveway & slab costs in Ohio?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →