Paver Patio Cost Calculator — Kansas
Average paver patio cost in Kansas: $5,994 (typical range $5,275–$6,893, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Kansas pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Kansas?
Based on current Kansas labor rates and material prices, a typical paver patio costs about $5,994. Most projects fall between $5,275 and $6,893, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,387 |
| 300 sq ft | $5,994 |
| 600 sq ft | $11,631 |
Where the money goes
- Pavers$2,573 (56%)
- Excavation$1,081 (23%)
- Base$969 (21%)
Materials $2,243 · Labor $1,471 (41 hours) · Equipment, disposal & permits $910 — before contingency, contractor overhead & profit and tax.
Kansas vs. United States average
A typical paver patio in Kansas costs 5% less than the United States average ($5,994 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $28.59 per hour in Kansas — and from regional material prices and Sales tax (materials) of 6.5%.
Paver Patio in Kansas: local factors
Kansas ranks 35th of 51 states for paver patio cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Kansas |
|---|---|---|
| Kansas | $5,994 | — |
| Colorado | $6,329 | +6% |
| Missouri | $6,273 | +5% |
| Nebraska | $5,989 | -0% |
| Oklahoma | $5,751 | -4% |
Permits & contractor licensing in Kansas
- Contractor license: Licensing rules in Kansas depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Kansas are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Kansas
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $18.16 | $36.32 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Kansas?
A typical paver patio in Kansas costs about $5,994, with most projects between $5,275 and $6,893. That is about $20 per sq ft.
How much of the cost is labor?
Labor is about 32% of the direct cost (41 work hours) for a typical project in Kansas. Materials are $2,243 and equipment, disposal and permits $910, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Kansas than in nearby states?
A typical paver patio costs $5,994 in Kansas. Among nearby states, Oklahoma is the lowest at $5,751 and Colorado the highest at $6,329. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Kansas?
Licensing rules in Kansas depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →