Paver Patio Cost Calculator — Ohio
Average paver patio cost in Ohio: $6,254 (typical range $5,504–$7,192, $21 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a paver patio cost in Ohio?
Based on current Ohio labor rates and material prices, a typical paver patio costs about $6,254. Most projects fall between $5,504 and $7,192, or roughly $21 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,525 |
| 300 sq ft | $6,254 |
| 600 sq ft | $12,144 |
Where the money goes
- Pavers$2,698 (56%)
- Excavation$1,126 (23%)
- Base$1,016 (21%)
Materials $2,289 · Labor $1,622 (41 hours) · Equipment, disposal & permits $928 — before contingency, contractor overhead & profit and tax.
Ohio vs. United States average
A typical paver patio in Ohio costs 1% less than the United States average ($6,254 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $30.09 per hour in Ohio — and from regional material prices and Sales tax (materials) of 5.75%.
Paver Patio in Ohio: local factors
Ohio ranks 26th of 51 states for paver patio cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Ohio |
|---|---|---|
| Ohio | $6,254 | — |
| Indiana | $6,206 | -1% |
| Kentucky | $5,927 | -5% |
| Michigan | $6,311 | +1% |
| Pennsylvania | $6,478 | +4% |
| West Virginia | $5,943 | -5% |
What affects the price in Ohio
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Ohio
- Contractor license: Residential general contractors are licensed or registered locally (city or county). Commercial HVAC, electrical, plumbing and hydronics contractors are licensed by the Ohio Construction Industry Licensing Board.
- Building code: The Residential Code of Ohio (based on the IRC) applies to one-, two- and three-family homes.
- Permits: Permits come from the certified city or county building department; some rural areas have no residential inspections.
Licensing authority: Ohio Department of Commerce – Industrial Compliance. Rules change — always confirm with your local building department.
Labor rates for this project in Ohio
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $20.03 | $40.06 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Ohio?
A typical paver patio in Ohio costs about $6,254, with most projects between $5,504 and $7,192. That is about $21 per sq ft.
How much of the cost is labor?
Labor is about 34% of the direct cost (41 work hours) for a typical project in Ohio. Materials are $2,289 and equipment, disposal and permits $928, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Ohio than in nearby states?
A typical paver patio costs $6,254 in Ohio. Among nearby states, Kentucky is the lowest at $5,927 and Pennsylvania the highest at $6,478. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Ohio?
Residential general contractors are licensed or registered locally (city or county). Commercial HVAC, electrical, plumbing and hydronics contractors are licensed by the Ohio Construction Industry Licensing Board.
What local conditions affect paver patio costs in Ohio?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →