Paver Patio Cost Calculator — Alabama
Average paver patio cost in Alabama: $5,632 (typical range $4,956–$6,477, $19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Alabama pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Alabama?
Based on current Alabama labor rates and material prices, a typical paver patio costs about $5,632. Most projects fall between $4,956 and $6,477, or roughly $19 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,201 |
| 300 sq ft | $5,632 |
| 600 sq ft | $10,913 |
Where the money goes
- Pavers$2,432 (56%)
- Excavation$1,034 (24%)
- Base$916 (21%)
Materials $2,219 · Labor $1,262 (41 hours) · Equipment, disposal & permits $900 — before contingency, contractor overhead & profit and tax.
Alabama vs. United States average
A typical paver patio in Alabama costs 11% less than the United States average ($5,632 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $23.79 per hour in Alabama — and from regional material prices and Sales tax (materials) of 4%.
Paver Patio in Alabama: local factors
Alabama ranks 50th of 51 states for paver patio cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Alabama |
|---|---|---|
| Alabama | $5,632 | — |
| Florida | $5,959 | +6% |
| Georgia | $5,818 | +3% |
| Mississippi | $5,638 | 0% |
| Tennessee | $5,884 | +4% |
Permits & contractor licensing in Alabama
- Contractor license: Licensing rules in Alabama depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Alabama are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Alabama
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $15.58 | $31.16 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Alabama?
A typical paver patio in Alabama costs about $5,632, with most projects between $4,956 and $6,477. That is about $19 per sq ft.
How much of the cost is labor?
Labor is about 29% of the direct cost (41 work hours) for a typical project in Alabama. Materials are $2,219 and equipment, disposal and permits $900, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Alabama than in nearby states?
A typical paver patio costs $5,632 in Alabama. Among nearby states, Mississippi is the lowest at $5,638 and Florida the highest at $5,959. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Alabama?
Licensing rules in Alabama depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →