Paver Patio Cost Calculator — Tennessee
Average paver patio cost in Tennessee: $5,884 (typical range $5,178–$6,767, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Tennessee pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Tennessee?
Based on current Tennessee labor rates and material prices, a typical paver patio costs about $5,884. Most projects fall between $5,178 and $6,767, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,333 |
| 300 sq ft | $5,884 |
| 600 sq ft | $11,411 |
Where the money goes
- Pavers$2,517 (56%)
- Excavation$1,063 (23%)
- Base$948 (21%)
Materials $2,243 · Labor $1,375 (41 hours) · Equipment, disposal & permits $910 — before contingency, contractor overhead & profit and tax.
Tennessee vs. United States average
A typical paver patio in Tennessee costs 7% less than the United States average ($5,884 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $25.96 per hour in Tennessee — and from regional material prices and Sales tax (materials) of 7%.
Paver Patio in Tennessee: local factors
Tennessee ranks 42nd of 51 states for paver patio cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Tennessee |
|---|---|---|
| Tennessee | $5,884 | — |
| Alabama | $5,632 | -4% |
| Arkansas | $5,591 | -5% |
| Georgia | $5,818 | -1% |
| Kentucky | $5,927 | +1% |
| Mississippi | $5,638 | -4% |
| Missouri | $6,273 | +7% |
| North Carolina | $5,758 | -2% |
| Virginia | $6,052 | +3% |
Permits & contractor licensing in Tennessee
- Contractor license: A state contractor license is required for projects of $25,000 or more; several counties also require a home improvement license for jobs of $3,000 to $25,000.
- Building code: Local governments adopt the International Residential Code; the state fire marshal enforces it where there is no local program.
- Permits: Permits are issued by the city or county, or by the state in areas without local enforcement.
Verify a contractor: Tennessee Board for Licensing Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Tennessee
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $16.98 | $33.96 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Tennessee?
A typical paver patio in Tennessee costs about $5,884, with most projects between $5,178 and $6,767. That is about $20 per sq ft.
How much of the cost is labor?
Labor is about 30% of the direct cost (41 work hours) for a typical project in Tennessee. Materials are $2,243 and equipment, disposal and permits $910, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Tennessee than in nearby states?
A typical paver patio costs $5,884 in Tennessee. Among nearby states, Arkansas is the lowest at $5,591 and Missouri the highest at $6,273. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Tennessee?
A state contractor license is required for projects of $25,000 or more; several counties also require a home improvement license for jobs of $3,000 to $25,000.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →