Paver Patio Cost Calculator — Utah
Average paver patio cost in Utah: $6,069 (typical range $5,341–$6,979, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a paver patio cost in Utah?
Based on current Utah labor rates and material prices, a typical paver patio costs about $6,069. Most projects fall between $5,341 and $6,979, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,436 |
| 300 sq ft | $6,069 |
| 600 sq ft | $11,773 |
Where the money goes
- Pavers$2,619 (56%)
- Excavation$1,104 (23%)
- Base$986 (21%)
Materials $2,312 · Labor $1,460 (41 hours) · Equipment, disposal & permits $938 — before contingency, contractor overhead & profit and tax.
Utah vs. United States average
A typical paver patio in Utah costs 4% less than the United States average ($6,069 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $26.62 per hour in Utah — and from regional material prices and Sales tax (materials) of 4.85%.
Paver Patio in Utah: local factors
Utah ranks 33rd of 51 states for paver patio cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Utah |
|---|---|---|
| Utah | $6,069 | — |
| Arizona | $6,071 | 0% |
| Colorado | $6,329 | +4% |
| Idaho | $6,081 | 0% |
| Nevada | $6,526 | +8% |
| New Mexico | $5,913 | -3% |
| Wyoming | $6,144 | +1% |
What affects the price in Utah
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Utah
- Contractor license: Licensing rules in Utah depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Utah are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Utah
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $18.02 | $36.04 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Utah?
A typical paver patio in Utah costs about $6,069, with most projects between $5,341 and $6,979. That is about $20 per sq ft.
How much of the cost is labor?
Labor is about 31% of the direct cost (41 work hours) for a typical project in Utah. Materials are $2,312 and equipment, disposal and permits $938, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Utah than in nearby states?
A typical paver patio costs $6,069 in Utah. Among nearby states, New Mexico is the lowest at $5,913 and Nevada the highest at $6,526. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Utah?
Licensing rules in Utah depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect paver patio costs in Utah?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →