Paver Patio Cost Calculator — Florida

Average paver patio cost in Florida: $5,959 (typical range $5,244–$6,853, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a paver patio cost in Florida?

Based on current Florida labor rates and material prices, a typical paver patio costs about $5,959. Most projects fall between $5,244 and $6,853, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,378
300 sq ft$5,959
600 sq ft$11,555

Where the money goes

  • Pavers$2,557 (56%)
  • Excavation$1,082 (24%)
  • Base$963 (21%)

Materials $2,289 · Labor $1,385 (41 hours) · Equipment, disposal & permits $928 — before contingency, contractor overhead & profit and tax.

Florida vs. United States average

A typical paver patio in Florida costs 6% less than the United States average ($5,959 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $25.27 per hour in Florida — and from regional material prices and Sales tax (materials) of 6%.

Paver Patio in Florida: local factors

Florida ranks 37th of 51 states for paver patio cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Florida
Florida$5,959—
Alabama$5,632-5%
Georgia$5,818-2%

Permits & contractor licensing in Florida

  • Contractor license: Contractors must hold a state certification or a local registration from the Florida Department of Business and Professional Regulation (Construction Industry Licensing Board).
  • Building code: The statewide Florida Building Code applies everywhere; Miami-Dade and Broward are High-Velocity Hurricane Zones with stricter product approvals.
  • Permits: Most jobs over $5,000 (over $15,000 for HVAC repair or replacement) need a recorded Notice of Commencement in addition to the building permit.

Verify a contractor: Florida DBPR – Construction Industry Licensing Board ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Florida

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$17.10$34.20
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Florida?

A typical paver patio in Florida costs about $5,959, with most projects between $5,244 and $6,853. That is about $20 per sq ft.

How much of the cost is labor?

Labor is about 30% of the direct cost (41 work hours) for a typical project in Florida. Materials are $2,289 and equipment, disposal and permits $928, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Florida than in nearby states?

A typical paver patio costs $5,959 in Florida. Among nearby states, Alabama is the lowest at $5,632 and Georgia the highest at $5,818. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Florida?

Contractors must hold a state certification or a local registration from the Florida Department of Business and Professional Regulation (Construction Industry Licensing Board).

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Florida

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming