Paver Patio Cost Calculator — Minnesota
Average paver patio cost in Minnesota: $6,818 (typical range $6,000–$7,841, $23 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Minnesota pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Minnesota?
Based on current Minnesota labor rates and material prices, a typical paver patio costs about $6,818. Most projects fall between $6,000 and $7,841, or roughly $23 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,824 |
| 300 sq ft | $6,818 |
| 600 sq ft | $13,257 |
Where the money goes
- Pavers$2,941 (56%)
- Excavation$1,213 (23%)
- Base$1,107 (21%)
Materials $2,381 · Labor $1,913 (41 hours) · Equipment, disposal & permits $966 — before contingency, contractor overhead & profit and tax.
Minnesota vs. United States average
A typical paver patio in Minnesota costs 8% more than the United States average ($6,818 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $33.81 per hour in Minnesota — and from regional material prices and Sales tax (materials) of 6.875%.
Paver Patio in Minnesota: local factors
Minnesota ranks 10th of 51 states for paver patio cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Minnesota |
|---|---|---|
| Minnesota | $6,818 | — |
| Iowa | $6,105 | -10% |
| North Dakota | $6,264 | -8% |
| South Dakota | $5,929 | -13% |
| Wisconsin | $6,436 | -6% |
What affects the price in Minnesota
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Minnesota
- Contractor license: Licensing rules in Minnesota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Minnesota are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Minnesota
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $23.62 | $47.24 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Minnesota?
A typical paver patio in Minnesota costs about $6,818, with most projects between $6,000 and $7,841. That is about $23 per sq ft.
How much of the cost is labor?
Labor is about 36% of the direct cost (41 work hours) for a typical project in Minnesota. Materials are $2,381 and equipment, disposal and permits $966, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Minnesota than in nearby states?
A typical paver patio costs $6,818 in Minnesota. Among nearby states, South Dakota is the lowest at $5,929 and Wisconsin the highest at $6,436. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Minnesota?
Licensing rules in Minnesota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect paver patio costs in Minnesota?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →