Paver Patio Cost Calculator — West Virginia

Average paver patio cost in West Virginia: $5,943 (typical range $5,230–$6,834, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from West Virginia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in West Virginia?

Based on current West Virginia labor rates and material prices, a typical paver patio costs about $5,943. Most projects fall between $5,230 and $6,834, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,369
300 sq ft$5,943
600 sq ft$11,522

Where the money goes

  • Pavers$2,550 (56%)
  • Excavation$1,079 (24%)
  • Base$960 (21%)

Materials $2,289 · Labor $1,372 (41 hours) · Equipment, disposal & permits $928 — before contingency, contractor overhead & profit and tax.

West Virginia vs. United States average

A typical paver patio in West Virginia costs 6% less than the United States average ($5,943 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $24.30 per hour in West Virginia — and from regional material prices and Sales tax (materials) of 6%.

Paver Patio in West Virginia: local factors

West Virginia ranks 38th of 51 states for paver patio cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. West Virginia
West Virginia$5,943—
Kentucky$5,927-0%
Maryland$6,372+7%
Ohio$6,254+5%
Pennsylvania$6,478+9%
Virginia$6,052+2%

What affects the price in West Virginia

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in West Virginia

  • Contractor license: Licensing rules in West Virginia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in West Virginia are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in West Virginia

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$16.94$33.88
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in West Virginia?

A typical paver patio in West Virginia costs about $5,943, with most projects between $5,230 and $6,834. That is about $20 per sq ft.

How much of the cost is labor?

Labor is about 30% of the direct cost (41 work hours) for a typical project in West Virginia. Materials are $2,289 and equipment, disposal and permits $928, before contingency, contractor overhead and tax.

Is a paver patio cheaper in West Virginia than in nearby states?

A typical paver patio costs $5,943 in West Virginia. Among nearby states, Kentucky is the lowest at $5,927 and Pennsylvania the highest at $6,478. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in West Virginia?

Licensing rules in West Virginia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

What local conditions affect paver patio costs in West Virginia?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for West Virginia

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming